Skip to main content

Cause determined in the deadly 2025 Eaton Fire in Southern California: Officials

People hold photos of those who perished in the Eaton Fire during a memorial service, July 7, 2025, honoring the 19 lives lost in Altadena, California. (Mario Tama/Getty Images)

(NEW YORK) — More than 18 months after it ignited and became one of the most destructive wildfires in U.S. history, authorities announced the cause of the 2025 Eaton Fire in Southern California.

The Los Angeles County Fire Department (LACFD) and the California Department of Forestry and Fire Protection (Cal Fire) on Tuesday released a report blaming the Eaton Fire on electrical arcing events that took place on an out-of-service Southern California Edison (SCE) tower.

The Eaton Fire, which started on Jan. 7, 2025, ravaged the community of Altadena near Los Angeles, killing 19 people and destroying more than 9,400 homes and businesses, authorities said.

“I recognize that no report or investigation into the Eaton Fire can ease the deep pain and tragedy our residents have endured,” Los Angeles County Fire Chief Anthony C. Marrone said in a statement. “While the cause has been determined, our focus remains on assisting our residents to rebuild their homes and livelihoods, and ensuring lessons learned drive meaningful and impactful change in memory of the 19 lives lost.”

SCE is the primary electric utility company for much of the Southern California, serving 15 million people.

Lawyers representing plaintiffs in numerous lawsuits against SCE released a joint statement, saying the report leaves the company “no place to hide,” and called it “an important step toward accountability.”

Besides the thousands of homes lost in the Eaton Fire, more than 1,000 other homes were damaged, according to the plaintiffs’ lawyers.

The Eaton Fire caused an estimated $8 billion to $10 billion in damage, according to a 2025 report by Verisk, a global data analytics company serving the insurance sector.

“It’s time for Edison to stop fighting the victims it harmed and provide every Eaton Fire survivor with the full compensation they deserve,” the plaintiffs’ lawyers said.

The report by LACFD and Cal Fire found that the origin of the Eaton Fire was a hillside transmission tower above Eaton Canyon Wash, and sparks from the arching electrical lines set dry vegetation beneath the tower on fire. Gusting winds in the area rapidly spread the blaze into residential areas of Altadena, destroying block after block of homes and prompting thousands of evacuations.

It took about a month for firefighters to fully extinguish the Eaton conflagration, which burned about 22 square miles.

The Eaton Fire occurred the same week as the Palisades Fire, which killed 12 people and wiped out more than 6,800 homes in nearby Pacific Palisades and Malibu. The cause of the Palisades Fire was determined to be arson, and a 29-year-old Florida man was arrested in October of 2025 on charges of setting the fire, officials said.

Together, the Eaton and Palisades fires caused an estimated $28 billion in damage, according to Verisk.

David Eisenhauer, an SCE spokesperson, told ABC News on Tuesday afternoon that the utility giant is reviewing the report from the LA County Fire Department and Cal Fire.

“We have taken our potential role in the start of this fire seriously from the beginning,” Eisenhauer said. “As we’ve previously said, SCE believes that it is likely that its equipment was associated with the ignition of the Eaton Fire.”

Eisenhauer added, “Our hearts are with the Altadena community, and we continue to support them as they recover and rebuild through our Wildfire Recovery Compensation Program.”

ABC News reported on Jan. 13, 2025, as the Eaton and Palisades fires were still burning, that one possible theory for the cause of the Eaton blaze involved transmission lines or electric facilities.

At the time, witnesses shared with ABC News Ring camera and cellphone videos that appeared to show what they believe to be the start of the Eaton Fire at the base of a transmission tower in the Eaton Canyon area.

In their report, fire investigators said that pursuant to the California Public Utilities Code, “SCE is to maintain and operate its electrical lines and equipment in a manner that would minimize the risk of catastrophic wildfire posed by them.”

SCE has claimed in lawsuits filed earlier this year that Los Angeles County emergency authorities failed to send timely evacuation warnings to residents in east and west Altadena. Most of the people who died in the fire lived in west Altadena.

Copyright © 2026, ABC Audio. All rights reserved.

Air traffic controller saves day when 2 jets with same call number converge

▶ Watch Video: American Airlines flies two jets with same flight number simultaneously in dangerous mistake An air traffic controller's quick thinking helped avert a dangerous situation late Thursday night when two American Airlines jets — one landing in Phoenix, Arizona, and the other simultaneously taking off — shared the same flight number and radio frequency.The veteran air traffic controller realized that American Airlines Flight 2482 from Chicago that was coming in for landing at Phoenix Sky Harbor International Airport — and one that had just taken off and was headed for Chicago — were on converging flights and had the same call sign.After catching the issue, the veteran air traffic controller began giving instructions to the pilots by differentiating their descriptions, using "American 2842 departing" and "American 2482 arriving."He was able to keep the aircraft separated, and both continued on their way without incident."I've been working air traffic for 25 years," the air traffic controller told the pilots, according to dispatch audio recorded by ATC.com. "I've never seen two aircraft pretty much merge with the same call sign. That's pretty incredible."He later added, "It could have been disastrous, but I'm glad it all worked out."The Federal Aviation Administration said the two planes maintained the required separation the entire time. The FAA said it is investigating the incident.American Airlines told CBS News the situation was triggered because the flight arriving from Chicago O'Hare International Airport was delayed. That plane was supposed to land in Phoenix, take on new passengers, and then return to Chicago on the same callsign.Because of the delay, however, a different aircraft was brought in so the waiting passengers in Phoenix could depart.American Airlines said in a statement it was "reviewing the details related to two American flights with the same callsign.""The diligence and professionalism of air traffic controllers and our pilots ensured required separation was always maintained and the issue was identified and addressed," the airline said. "Both flights continued safely and without incident." 
Read Next Story